วันพุธที่ 12 พฤษภาคม พ.ศ. 2553

DSL-520T

>>> DSL-520T How to Connect DSL-520T using PPPOE?

Step 1 Connect your PC to the LAN port of your DSL-520T

Step 2 Start up a Internet explorer and key in 192.168.1.1 (by default) on address bar (e.g. http://192.168.1.1)
Note: You don't need to have internet access for this.

Step 3 Enter the Username: admin , Password: admin (by default)

Step 4 Click on the Home tab.

Step 6 Click on the Run Wizard button.

Step 7 Click on the Next icon.

Step 8 Select the correct Time zone. (e.g. GMT +07:00). Click on the Next icon.

Step 9 Select the PPPoE/PPPoA option. Click on the Next icon.

Step 10 Key in your Broadband account User Name and Password.
Key in your VPI and VCI values.
The value usually comes customized for local ISP.
VPI and VCI value;
Singnet : VPI:0, VCI:100
Pacnet : VPI:0, VCI:100
True : VPI:0, VCI:100
TOT : VPI:1, VCI:32
TT&T : VPI:0, VCI:33
BuddyBB : VPI:0, VCI:35
Streamyx : VPI:0, VCI:35
Maxis : VPI:0, VCI:35
Jaring : VPI:0, VCI:35
TelkomSpeedy : Jakarta VPI:8, VCI:35 or please ask Telkom 147 further info at your area ADSL setting. (e.g. ATM PVC Configuration, Service Category, Connection Type, Encapsulation Mode)

Select the correct Connection type. PPPoE LLC
(Username might be vary please check with your ISP for the correct username) Click on the Next icon.

Step 11 Click on the Restart icon.

Step 12 You will see that the DSL-520T is restarting. Please allow one minute of waiting time for the restart process.

Step 13 Lastly, click on the close button to return to the Web Browser configuration.

------------------------------------------------
>>> DSL-520T Virtual Server - Configuration port forwarding

Use the Virtual Server window to set up single-port, trigger port or static-port range forwarding rules applied to
inbound (WAN-to-LAN) traffic. The Virtual Server function allows remote users to access services on your LAN such
as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-520T will accept remote requests for these services at
your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to
the server on your LAN with the LAN IP address you specify. Remember that the specified Private IP Address must be
within the useable range of the subnet occupied by the Router.
UDP/TCP port redirection is used to direct inbound traffic to the specified servers or workstations on your private
network. Port redirection can also be used to direct potentially hazardous packets to a proxy server outside your firewall.
For example, you can configure the Router to direct HTTP packets to a designated HTTP server in the DMZ. You can
define a set of instructions for a specific incoming port or for a range of incoming ports. Each set of instructions or rule
is indexed and can be modified or deleted later as needed.
The Virtual Server options include a list of preconfigured rules (listed below) for commonly used protocols in the
Virtual Server List. To enable a preconfigured rule, click the selection box for the rule you want to enable and click the
Apply button.

There are many different pre-configured rules available for specific functions such as Internet gaming, VPN, streaming
and interactive multi-media, standard TCP/IP protocols, reserved ports, p2p, network management applications, and so
on.
You may also create customized rules to manage TCP/UDP ports. The pre-configured rules include those listed in the
table here:

To configure a new port-forwarding rule for any of the pre-configured rules, follow these steps:
1. Select the WAN connection you want to use for the new rule from the Connection pull-down menu.
2. Select a LAN IP from the available client IP addresses listed in the pull-down menu; or, create a New IP by
clicking the button. This brings up the LAN Clients window (see next section).
3. Select the Category of the rule you are creating. The Available Rules for the category appear in a list.
4. Highlight to select the Available Rule you want to apply.
5. Click on the Add button to place the rule in the Applied Rules list of port forwarding that are actively
applied to the client
The Available Rules can be applied to a single client IP address. That is, it is not possible to use an applied rule for
multiple IP addresses on the LAN.

--Custom Forwarding Rules
The User category for port forwarding is used to set up customized port forwarding rules.
To set up custom TCP or UDP port forwarding rules, follow these steps:
1. Select the User category and click the Add button located below the Available Rules list. This will change the
window to look like the window below.
2. Type a Rule Name in the space provided.
3. Select the port Protocol from the pull-down menu - you may select TCP, UDP or both (TCP/UDP).
4. Configure a range of ports for forwarding. Type the lowest numbered port in the range in the Port Start space.
Type the highest numbered port in the Port End space. For a single port, just enter the same number in both
spaces.
5. Type a number for the Port Map in the space provided.
6. Click the Apply button to create the new rule. The new rule will appear listed in the table of custom port
forwarding rules.

------------------------------------------------