>>> DSL-500G Basic Install /Configuaration
1.Connect your PC to the LAN port of your DSL-500G
2.Start up an Internet explorer and key in 192.168.1.1 (by default)
By default Username: admin Password: admin
3 Click on Home >> Quick configuration
4.PVC: Leave this set at the default value 0 the first time the Router is set up. For more information on
this option see Multiple PVC Operation
5.Operation Mode: This also should be left at the default setting Enabled. This enables the PVC used for the initial connection.
6.Connection Type: Change connection method and packet encapsulation technique as instructed by your ISP. The available connection types are PPPoE LLC, PPPoE VC-Mux, PPPoA LLC, PPPoA VC-Mux,IPoA LLC, IPoA VC-Mux, Bridged IP LLC, Bridged IP VC-Mux, form the pull-down menu. Default Connection Type = PPPoE LLC.
7. VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0). Default = 0.
8. VCI: If instructed to change this, type in the VCI value for the initial connection (using PVC 0). Default = 35.
9. Bridge: This may be left t the default setting Disabled. Some users may opt to enable this now by selecting Enabled from the drop-down menu.
10. IGMP: Leave this set to Disabled.
11. IP Address: & Subnet Mask: Some users may be required to configure the IP settings for the WAN connection. If you are using IPoA or a Bridged IP connection, you may be instructed by your ISP to enter your global IP settings. If you are told to enter an IP Address and Subnet Mask, enter ithem here.
12. DNS Some users will be required to enter an IP address used for DNS services. If you are given a DNS server IP address enter that here along with a secondary or back-up DNS server IP address if you were given one.
13. For PPP connections (PPPoE or PPPoA), you must supply a User Name and Password used to verify the identity of your account.
14. If you entered a DNS server IP address (Step 9) leave this set to Enable. If you are not using DNS, select the Disable option.
15. When you have defined the Quick Configuration settings, click the Submit button to save the settings in temporary memory. These settings and all other configuration changes made to the Router must be Committed (to non-volatile memory) and the Router must be rebooted for the changes to go into effect.
The Router will negotiate the ADSL connection automatically upon rebooting. Continue to the Commit & Reboot procedure.
------------------------------------------------
